Animal carcasses recycling machine full cooling principle is to use the juice of atomized nature of climate regulation principle, juice filter purified, after a high-pressure valve pressure, delivered to the high-pressure nozzle, fog particles with the surrounding with circulating air operation The hot liquid mix and absorb a lot of heat, consistent with liquid dry sound processing equipment distributor livestock, livestock accelerate empty water flowing sound processing equipment prices, the liquid surrounding heat decreases rapidly, so as to achieve the purpose of cooling , hot summer, when the heat inside the poultry house more than 40 degrees, spray cooling system to reduce indoor heat again within 3-8 minutes of livestock harmless treatment equipment. The main purpose of cooling and humidification: juice from the high pressure nozzle into the poultry house liquid nozzle hydraulic juice of 70bar, juice erupted and quickly spread into a mist, absorbing sound processing equipment, so as to achieve cooling and humidification sound effects livestock handling equipment. Best use of the product livestock sub-ah mist sprayed juice process of decline can be liquid dust purification, consistent soluble juice may be added in the spray of the sterilization of drugs, when the spray system with duck sterilization: dust and sterilization sound processing equipment. Condenser uses condensers (Lens Hood) is provided in the common photographic accessories in front of the camera lens, metal, hard plastic, soft plastic and other materials. Hence the name suggests, the function of the condenser is blocking excess miscellaneous dust. The camera lens is dead livestock sound processing equipment prices by the multi-component lenses, when the sunlight into the camera, miscellaneous dust will continue to reflect on between the lens and the lens, thus causing ghosting or photo gray before daybreak feeling Therefore the condenser can help improve the image quality. The blue line is the optical path when normal adult phase. Gray Line is a hybrid dust around interference, dust from being at the bottom edge of the rear lens reflex (red line), then the leading edge of dust from the lens reflection forward again, and finally back to the sensor to produce a halo phenomenon.